 |
 |
 |
|
|
Finishes and Sealers |
||
|
Rod Finishes |
||
|
Erskine 3337 Epoxy Rod Finish |
60ml 50ml (Pictured) |
3337 |
|
Erskine 3337 Epoxy Rod Finish |
240ml |
|
|
Erskine 3337 Epoxy Rod Finish |
1lt |
|
|
Erskine 3337 Epoxy Rod Finish |
2lt |
|
|
Erskine 3336 Thread Preserver & Sealer |
30ml 50ml (Pictured) |
3336 |
|
Erskine 3336 Thread Preserver & Sealer |
120ml |
|
|
Erskine 3336 Thread Preserver & Sealer |
500ml |
|
|
Erskine 3336 Thread Preserver & Sealer |
1lt |
|
|
Attention- 'Epoxy Rod Finish' |
||
|
Due to the purity of our resins, a clouding or setting of the resin may occur in extremely cold conditions. Should this occur, place resin container in hot tap water until resin clears. Allow resin to return to room temperature (approximately 21 degrees Celsius) before mixing with the hardener. |
||
|
Speed Rod Finishes |
||
|
Speed Thread Sealer & Filler |
50ml (Pictured) |
Sealer & Filler |
|
Speed Thread Sealer & Filler |
500ml |
|
|
Speed High Gloss Rod Finish |
50ml 50ml (Pictured) |
Finish |
|
Speed High Gloss Rod Finish |
500ml |
|
|
Gudebrod Colour Preserver |
||
|
This clear, quick drying and non-blushing colour preserver assures complete penetration on all types of thread wraps. Fast drying, requires about 20 minutes between coatings. After applying each coat, remove excess Colour Preserver using a brush. Convenient water clean-up. |
||
|
Gudebrod Colour Preserver |
1oz |
|
| Gudebrod
Stick Ferrule Cement
|
No Image Available Yet. |
|
Updated November 27, 2002
